MTS Post Mortem Table

Model MTS Postmortem Table and sink. Dimensions: 2,565 x 765 x 865 mm, but custom sizes can be ordered. The MTS postmortem table is manufactured from Grade 304 (18/10) stainless steel, 1,6 mm thick. Rinse bowl 505 x 505 x 230 mm deep pressed bowl with a 40 mm waste outlet. The underside sprayed with vermin proof bitumastic sound deadening paint and supported with a 30 x 30 x 3 mm framework and galvanized mild steel backing sheet. The framework is required for the removable feet, however, this can be omitted if the unit is dropped onto a cupboard unit or your own frame.  The MTS Postmortem Table is fitted on to four 40 mm stainless steel legs and cross braces, each leg fitted with adjustable flanged foot piece. Unit fixed 900 mm high from the top of the front apron to the finish floor level with holes for anchor bolts (not supplied).

The MT Post Mortem Table  1980 x 765 x 900 mm is manufactured from grade 304 (18/10) stainless steel and 1,6mm thick. The slab is constructed with 30mm deep recess all round with a built in fall towards the 40mm standard waste outlet (not supplied). The underside sprayed with vermin proof bitumastic sound deadening and supported with a 30 x 30 x 3 mm framework made from galvanised mild steel backing sheet. The MT Post Mortem Table is fitted on to four 40 mm stainless steel legs and cross braces, each leg fitted with adjustable flanged foot piece. The unit is fixed 900 mm high from the top of the front apron to the finish floor level with anchor bolts.

The MT Post Mortem Table can also be used in veterinary clinics and hospitals.  The unit is quite often then customized to 1500 x 900 x 900 mm to accommodate various types of animals.  When the unit is used in surgery, castors are installed so that the animal can be transported to a calming room after surgery.